TSI Detection Management Software DMS
Powering and Outputs on the EVM
EVM Series User Manual
17
TSI Detection Management Software DMS
DMS is a software application designed by TSI that runs under the Windows operating system. You can
use DMS for a variety of functions such as: customizing your set-up parameters, displaying data,
manipulating data, and creating reports.
Communicating
A USB cable (included in the kit) is used for communicating between the EVM and the software. (First
remove the black rubber casing over the ports and then insert the USB cord in the bottom connector.)
(See
for more details on software and the EVM.)
Figure 2-7: Communicating with DMS via USB cable
Powering and Outputs on the EVM
Battery
The battery is an internal Lithium-ion Rechargeable battery pack. The minimum hours of operating time
is 8 hours of continuous operation including setup time, run time, and viewing your result time. This
battery is not user accessible or replaceable.
The universal power adapter cord is a 10 to 16 volt power inlet (nominal 12 VDC) with 1.5 amps and is
used as an external power source. (For more details on battery power, see “Checking battery power” in
