TSI Instruments 3082, Operation And Service Manual

Page: 211 / 225

Computer Interface C-5
Table C-2
Electrostatic Classifier Firmware Commands List (select)
Command Title Description
RSCUSTOMDMATYPE Read Custom
DMA Type RSCUSTOMDMATYPE reads the custom DMA type to 1 (cylindrical) or
2 (radial). Set to 1 by default.
RSIMPMN Reads Impactor
EEPROM Model
Number RSIMPMN returns the Impactor serial number.
Example: RSDMAMN returns 3081A or 3085A
RSIMPSN Reads Impactor
EEPROM Serial
Number RSIMPSN returns the Impactor serial number.
Example: RSIMPSN returns 4571234
RMSHFAP Read Sheath
Absolute
Pressure RMSHFAP returns the measurement of the sheath absolute pressure.
Example: RMSHFAP returns the pressure in kPa.
RMIMPDP Read Impactor
Differential
Pressure RMIMPDP returns the measurement of the sheath absolute pressure.
Example: RMIMPDP returns the pressure in kPa.
RMSHRH Read Sheath
Relative Humidity RMSHRH returns the measurement of the sheath relative humidity.
Example: RMSHRH returns the relative humidity in %.
RMCASETEMP
Read Case
Temperature RMCASETEMP returns the case temperature.
Example: RMCASETEMP returns the temperature in °C.
RMSHTEMP Read Sheath
Flow
Temperature RMSHTEMP returns the sheath flow temperature.
Example: RMSHTEMP returns the temperature in °C.
RMSHFLOW Read Sheath
Flow RMSHFLOW returns the sheath flow rate.
Example: RMSHFLW returns the flow in L/min.
RMHVDUAL Read High
Voltage Dual
Polarity RMHVDUAL returns the high voltage dual polarity.
Example: RMHVDUAL returns the values 0 or 1, where 0 = negative only
installed, and 0 = negative and positive installed.
RMHV Read High
Voltage RMHV returns the DMA high voltage.
Example: RMHV returns the high voltage in volts.