manualshive.com logo in svg

TSI Instruments 3082, Operation And Service Manual

The TSI Instruments 3082 is a cutting-edge product designed for precision measurements. To help you get started quickly, we offer a comprehensive Quick Start Manual that you can easily download for free from our website. This manual provides step-by-step instructions to ensure you make the most of your product.

Share
Download
background image

viii 

Electrostatic Classifier Model 3082 and SMPS Spectrometer Model 3938 

 

W A R N I N G

 

  Although the 3938 SMPS spectrometer is appropriate for monitoring 

inert process gases such as nitrogen or argon, it should not be used 
with hazardous gases such as hydrogen or oxygen. Using the 3938 
SMPS spectrometer with hazardous gases may cause injury to 
personnel and damage to equipment. 

E l e c t r i c a l   S a f e t y  

The Electrostatic Classifier Model 3082, all supported CPCs (Models 3772, 
3775, 3776, 3777, 3787, 3788), and all supported DMAs (Models 3081(A), 
3085(A), and 3086) have high-voltage points within their housings. Only a 
qualified technician should perform service or maintenance.  
 

 

W A R N I N G

 

  High-voltage is accessible within this instrumentation. Unplug the power 

source 

before

 removing the cover to perform maintenance procedures. 

Do not apply power to the Model 3938 SMPS spectrometer unless the 
DMA high-voltage cable is connected to the 3082 Classifier and the 
base DMA is mounted to the 3082 Classifier.  

Always use the provided power cord to ensure proper grounding of the 
instrument.  

D e s c r i p t i o n   o f   S a f e t y   S y m b o l s   a n d   L a b e l s  

This information explains the advisory and identification labels used on the 
instrument and in this manual to reinforce the safety features built into the 
instrument. 

Caution Symbols 

 

C a u t i o n

 

 

Caution

 means 

be careful. 

If you do not follow the procedures described 

in this manual, you may damage the instrument. Caution also indicates 
important information about the operation and maintenance of this 
instrument. 

Warning Symbols  

 

W A R N I N G

 

 

Warning

 

means that unsafe use of the instrument could result in serious 

injury to you or cause irrevocable damage to the instrument. Follow the 
procedures prescribed in this manual to use the instrument safely. 

 

Summary of Contents for 3082


































































































































































































































Reviews:

No comments

Related manuals for 3082

Olympus UCR Instructions Manual preview
UCR
Brand: Olympus Pages: 86
Velocitek SC-1 Reference Manual preview
SC-1
Brand: Velocitek Pages: 81
ABS ABS-Lock X-Flat Instruction Manual preview
ABS-Lock X-Flat
Brand: ABS Pages: 8
ABS ABS-Lock X-DURCH Instruction Manual preview
ABS-Lock X-DURCH
Brand: ABS Pages: 8
ABS ABS-Lock DH05 Installation Manual preview
ABS-Lock DH05
Brand: ABS Pages: 8
M-system Mini-MW Series Manual preview
Mini-MW Series
Brand: M-system Pages: 5
MA dot2 User Manual preview
dot2
Brand: MA Pages: 2
MÄDLER FS Mounting And Operating Instructions preview
FS
Brand: MÄDLER Pages: 4
York International PV9DH Series User'S Information, Maintenance And Service Manual preview
PV9DH Series
Brand: York International Pages: 16
X-10 X10 PRO XP4LS Installation And Operating Instructions Manual preview
X10 PRO XP4LS
Brand: X-10 Pages: 12
Equinox Systems Scantastic 4 User Manual preview
Scantastic 4
Brand: Equinox Systems Pages: 8
Poulan Pro PB19546LT Repair Parts Manual preview
PB19546LT
Brand: Poulan Pro Pages: 17
Ultra Firefly Low Voltage Lighting System Installation Manual preview
Firefly Low Voltage Lighting System
Brand: Ultra Pages: 2
Lumination LUMEL Series Quick Start Manual preview
LUMEL Series
Brand: Lumination Pages: 2
Mindray Zonare ZS3 Instructions For Use Manual preview
Zonare ZS3
Brand: Mindray Pages: 165
Anslut 019936 Operating Instructions Manual preview
019936
Brand: Anslut Pages: 20
DC THE FLASH Installation Manual preview
THE FLASH
Brand: DC Pages: 2
Jesco INFINA DL-AC-FLEX2-RGBW Instructions Manual preview
INFINA DL-AC-FLEX2-RGBW
Brand: Jesco Pages: 7

Brands by name

Popular brands

Load more brands