TSI Incorporated SIDEPAK AM510, User Manual

Page: 35 / 74

Operation 27
To program the above example, do the following:
1. Make sure the SidePak monitor is connected to the
computer and turned on.
2. Select Logging Setup from the Instrument Setup
menu. TrakPro software retrieves the current settings for
Prog 1 and Prog 2 modes from the SidePak monitor and
displays them in the dialog shown above.
3. Enter the following for Prog 1 and Prog 2:
Setting Prog 1 Prog 2
Start Date 09/01/2008 09/01/2008
Start Time 08:00 08:00
Log interval 01:00 05:00
Test length
00:08:00 00:08:00
Number of
tests
1 2
Time between
tests
00:00:00 00:16:00
4. Select Send . The SidePak monitor is programmed for the
Prog 1 and Prog 2 protocols.
5. Note that the Prog 1 test requires 1% of the available
memory and Prog 2 requires less than 1% of the
memory. A total of 100% of the memory is available for
use.