TSI Incorporated SIDEPAK AM510, User Manual

Page: 22 / 74

Chapter 2 14
Use the ▲ ▼ keys to set the correct month and press

. Use
the ▲ ▼ keys to select the correct day and press

(order
will vary depending on selected date format).
6. Press the PAGE key to return to Survey Mode.
Installing TrakPro
™ Data Analysis Software
TrakPro Data Analysis Software can preprogram the SidePak
AM510, download data, view and create raw data and statistical
reports, create graphs, and combine graphs with data from other TSI
instruments that use TrakPro software. The following sections
describe how to install the software and set up the computer.
Note : To use TrakPro software with the SidePak AM510, the PC
must be running Microsoft Windows
®
and the computer must
have an available Universal Serial Bus (USB) port.
1.
Insert the TrakPro software CD into the CD-ROM drive. The
install screen starts automatically.
Note : If the software does not start automatically after a few
minutes, manually run the program listed on the label of
the CD using the
Run command on the Windows Start
Menu.
2.
Follow the directions to install TrakPro software.
TrakPro software contains a comprehensive installation guide. It is
recommended to print out this prior to starting the TrakPro software
installation on your computer, so it may be consulted during the
installation. The TrakPro software manual is located in
the “Help” file
in TrakPro software. There is no separately printed TrakPro software
manual.
Connecting the SidePak AM510 Personal Aerosol Monitor to
Your Computer
for the first time
Most SidePak AM510 kits include a USB (Universal Serial Bus) cable
that connects between the instrument and an available USB port on
your PC.
1. Locate an available USB port on your computer.
2. Connect the larger end of the USB cable to the USB port.
3. Turn the SidePak AM510 on.
4. Connect the small end of the USB cable to the USB port on the
SidePak AM510.
®
Microsoft and Windows are registered trademarks of Microsoft Corporation.