3.4 Installing A One Quart Cup Assembly (For Use With Turbine Air)
To install a standard 1 quart (1 liter) cup assembly to the 7500 AtomiZer turbine spray gun follow these simple instructions:
1. Locate the cap (#11, page 33) that blanks the material connector not being used and make
sure that it is installed on the top material connection (#30, page 33).
2. Screw the cups center bolt to the material connector (#29, page 33), finger tight.
3. Locate the brass air feed nipple on the cup top and rotate the cup lid so
that the brass nipple is in the 7 o’clock position and the cup lever is in
the front of the gun.
4. While holding the cup assembly firmly, tighten the cups center bolt with
the wrench (spanner) supplied.
Summary of Contents for Apollo 7500 AtomiZer
Page 32: ...8 Diagram Parts List...
