CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
21 of 41
ASSEMBLY STEPS:
Step 10 Attach Chin Bar:
Step 11 Floor Levelers:
Step 12: Remove Protective Film from Decals:
a) Attach Chin Bar using 4 M8x12
bolts.
b) Attach Chin bar covers by
aligning grooves and sliding
forward.
Hardware Required (Bag 10):
If necessary, adjust four levelers
on bottom of machine to
accommodate uneven flooring.
Once Elliptical is moved into
its final location, remove the
protective film from the decals
and from the “True” on the lower
shroud.
4 M8 x 12 mm bolts
M8 x 12 bolts
Levelers
Chin Bar
Cover