CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
16 of 41
ASSEMBLY STEPS:
Step 1 Assemble Pedestal to Base:
d) To secure the Pedestal to the Base,
use 2 M10x70mm bolts on the inside
and 4 M10x20mm bolts on the front
and back. Do this for both sides.
*Do NOT pinch wires!
Hardware Required (Bag 2) :
e)
Connect Wires coming out of the
bottom right side of pedestal to the
corresponding wires coming out of the
frame.
4 M10 x 20mm Bolts
2 M10 x 70mm Bolts
Step 2 Attach Inner Shrouds:
a) Make sure wires are tucked away
before attaching inner shrouds.
b) Use two M4x16mm screws and four
M5x12 screws per side to attach inner
shrouds.
Hardware Required (Bag 2):
8 M5 x 12mm Bolts
4 M5 x 16mm Bolts
M10 x 20mm
Bolts
M10 x 70mm
Bolts
Connect all wires
and push them
back into the
opening and out
of the way.
M4 x 16mm Bolts
M5 x 12mm Bolts
Make sure to pull
black cover over
Coax connection.
