How to Record & Run User Programs
CHAPTER THREE: USER PROGRAMS
PS 75 Treadmill Owner’s Guide
24
Create a User Program
1. Press User Program Key
�������������
on console.
2. Select User 1 or 2 by pressing key once or twice (there are
two user programs available).
3. Enter your desired workout time and begin using treadmill
in a manually-controlled workout.
4. The treadmill will “record” any changes you make in
speed or incline. Up to 36 changes in speed or incline can
be recorded. Each speed/incline pair of changes must be
separated by at least 30 seconds.
Note on varying the workout time:
When you “record” a user
program over a specified workout time, the speed and incline
changes are stored relative to that time.
What happens when you choose a user program that was
recorded over 20 minutes, but then change the “playback” time
to 30 minutes? The program “stretches” out over the longer time,
automatically scaling the shorter time to the longer time.
The reverse is also true: a 20-minute recorded program played
back over 10 minutes compresses each of the speed and incline
segments.
How To
Record
And Run
User
Programs
PS 75 Treadmill Owner’s Guide
How to Record & Run User Programs
CHAPTER THREE: USER PROGRAMS
24
Summary of Contents for PS75
Page 1: ...Treadmill Owner s Manual ...
Page 36: ...Target Heart Rate Chart A Guide to Help You Pick an Initial Target Heart Rate Appendix A 39 ...
Page 37: ...PS 75 Treadmill Owner s Guide Appendix A 40 Target Heart Rate Chart ...
Page 38: ...METs Table How Speed and Incline Affect Workload Expressed in METs Appendix B 41 ...
