4mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
4mm
4mm
4
Wood dowel (4x30mm)
Rib template (3mm ply)
1
4
Wood dowel (4x30mm)
According to the rib template drill holes in the side-wings.
8
Pin hinge (36x20x1mm)
8
2
4
2
4
2
4
2
Clevis
Rod (2x300mm)
Retainer
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Washer(3x15mm)
2
Washer(3x15mm)
Lock Nut (3mm )
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Epoxy the side-wing to the side-fuselage tightly.
2
Main wing joiner(25x800mm)
According to the rib template drill holes in the
side-fuselages and epoxy the wood dowels in them.
Assemble the detachable middle wings to the
side-fuselage tightly.
According to the rib template drill holes in the
side-fuselages and epoxy the wood dowels in them.
12
13
11
14
3
15
Accessory list for the coming installation steps.
Air tank
Switch
Air inlet
3-way
pressure inlet
3-way
pressure inlet
3-way
pressure inlet
The status when the
gear up
Pull out length of 8mm
to make gear down
Air valve
Air valve
Make sure to assemble retracts as instructed below.
Two wheel retract system
Quick release connector
Quick release connector
Pressure reduction inlet
Strut
Strut
3-way pressure inlet
3
Pressure reduction inlet
1
1
Air tank
1
Air inlet
2
1
1
Air line (3000mm)
2
Quick release connector
Strut
( 90 )
Switch
Clevis
Rod (2X300mm)
1
1
1
Retainer
TP Screw(2x14mm)
2
Ø1.7mm
Ø0.2mm
85mm
AILERON
40mm
FLAP
20mm
20mm
Side View
AILERON FLAP
Pleas notice the inner diameter for each
side of the pressure reduction inlet.
Please insure the sealing of the retract
system before flight .
Centre of Gravity.
Adjustment.
95
94
18
