10
TP Screw (2.3x8mm)
Ply (15x15x3mm)
10
1.5mm
TP Screw (2.3x8mm)
Epoxy the exhaust to the cowling from inner of the cowing.
epoxy the ply under cowling and assemble the
cowling to side fuselage.
8
6
2
2
2
4
2
4
2
2
Clevis
Rod (2x300mm)
Retainer
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Pin hinge(24x24mm)
Screw (3x35mm)
Washer(3x15mm)
2
Washer(3x15mm)
Lock Nut (3mm )
Reinforcement Plate 2
2
Screw (6x45mm)
Main wing joiner
1
Rib template (3mm ply) 1
2
Wood dowel (4x30mm)
2
Blind Nut (6mm)
2
Wood dowel (6x30mm)
The openning direction of exhaust
in the cutside cowling!
Make sure hinges are
mounted in the same line.
6
Pin hinge(24x24mm)
1mm
Aileron
Trailing
edge
Make sure they are in
the right position while
installing.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
4
Hook screw
2
Rubber band
Hook
1
Ply (30x20x9mm)
2
Apply instant type CA glue to aileron and pin hinge.
Keep 1mm width space between aileron and trailing edge.
Assemble the aileron to main wing with instant
type CA glue.
29
32
6
28
30
31
Accessory list for the coming installation steps.
PVC Part
2
PVC Part
2
PVC Part
2
PVC Part
1
15
15
TP Screw (2.3x8mm)
Ply (15x15x3mm)
2
Washer(3x6mm)
Nut (3mm)
1
1
Aluminum mounting (8mm)
Screw (3x20mm)
1
PVC Part
1
1
Aluminum mounting
2
Steel wire (0.5x1200mm)
Assembly of the switch servo.
Assemble the switch servo in the fuselage.
Fix the battery and receiver in the fuselage.
Cut away the surplus parts of the PVC parts
along the shaded line.
The illustration of the steel wire for tail wheel
in the fuselage.
78
81
79
80
80
15
82
Accessory list for the coming installation steps.
