Hook
1
4mm
4mm
80mm
30mm
6mm
Main wing joiner
1
2
Wood dowel (4x30mm)
Rib template (3mm ply)
1
6mm
80mm
11mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Trim small holes to drag the the servo lines out.
According to the rib template drill holes in the detachable
middle wings and epoxy the wood dowel in them.
Join the detachable diddle wings together tightly
with the main wing joiner.
Drill holes in the appropriate position in the fuselage.
Drill holes to appropriate position in the front of middle
wing and epoxy the wood dowel in them.
Assemble the outer-wing to side-wing tightly by the hook.
40
41
42
8
39
44
43
1
Tail gear supporter
TP Screw (3x14mm)
2
1.5mm
Collar (3mm)
Triangle block
2
4mm
39mm
10mm
4mm
39mm
10mm
2
Matal douel (4x30mm)
Ply (6mm)
Collar (3mm)
Tail gear supporter
Tail landing gear
18mm
Epoxy the triangle block to the ply and then
epoxy them to the form as illustration.
Let the landing gear pass through the middle hole in the tail
gear supporter and fix the tail gear supporter with screw.
Assemble the tail wheel to the tail landing gear.
Drill holes to appropriate in the tail of fuselage as below.
Drill holes in relevant position in the stabilizer
and epoxy the wood dowel in them.
Fix the ply by the collars and notice the distance
between the ply and the steering arms.
69
70
71
72
13
68
67
