40mm
170mm
21mm
2mm
40mm
170mm
21mm
2mm
2mm
16
Screw (2x10mm)
Washer (2x5mm) 32
16
Nut (2mm )
Screw (2x10mm)
Washer (2x5mm)
Nut (2mm )
Washer (2x5mm)
8
Pin hinge (36x20x1mm)
Entad
2mm
16
Screw (2x10mm)
Washer (2x5mm) 32
16
Nut (2mm )
Screw (2x10mm)
Washer (2x5mm)
Nut (2mm )
Washer (2x5mm)
Entad
2mm
8
Pin hinge (36x20x1mm)
Cut the shaded portion away from the available
pin hinges and enlarge the holes as below.
Assemdle the pin hinge to appropriate position from
inner landing gear corers.
Drill holes to velevant position in side fuselage and assemble
the landing gear cover to inner side fuselage as below.
The front view when landing gear cover assembled
to side fuselage.
Trim the shaded portions from side fuslage.
Trim the shaded portion from the landing gear covers.
06
07
08
09
10
20
05
Blind Nut (4mm)
2
Engine mount (106x86mm)
Linkage Stopper
8
8
24
8
Washer(4x8mm)
Screw (4x35mm)
Spring Washer (4mm)
Nut (4mm)
4
8
Screw (4x25mm)
4
Plastic tube (2x400mm)
Fuel tank (550cc)
2
8
5.2mm
Blind Nut
8
Blind Nut (4mm)
160 mm
10
Ply (90x80x2mm)
Ply (90x80x2mm)
Ply (90x80x2mm)
10
Ply (90x80x2mm)
8
TP Screw (3x20mm)
22
TP Screw ( 2.3x8mm)
Ply (15x15x3mm)
22
2
Wheel (100 mm)
2
Scale exhaust
4
Wood dowel (6x50mm)
Rib template (3mm ply)
1
Washer (4x8mm)
Washer (4x8mm)
Washer (4x8mm)
Screw (4x35mm)
Screw (4x25mm)
Nut (4mm)
Spring Washer (4mm)
4mm
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x400mm)
Set Screw (2mm)
Washer (2mm)
Linkage Stopper
2
Set Screw (3x4mm)
2
2
2
Assemble the engine as below.
Assemble the accelerator push rod to the engine.
The sketch map of the the push rod assemble
completion
The front view and side view when the engine install
completion.
Drill four holes as show for engine mount.
1
2
3
4
5
1
Accessory list for the coming installation steps.