![background image](http://html1.mh-extra.com/html/troy-bilt/ls-33-tb/ls-33-tb_operators-manual_1173099016.webp)
Stand in front of the log splitter to operate the
c.
control handle and to stabilize the log. See Fig. 5-2.
To place the beam in the Horizontal Position proceed as
4.
follows:
Pull the vertical beam lock out and rotate it down.
a.
See Fig. 5-1. Pivot the beam to the horizontal
position.
To lock the beam in the horizontal position, pull out
b.
on the horizontal beam lock and rotate it to secure
the beam. See Fig. 5-3.
Stand behind the reservoir tank to operate the
c.
control handle and to stabilize the log. See Fig. 5-4.
Block the front and back of both wheels.
5.
Place the log against the end plate and only split wood in
6.
the direction of the grain.
To stabilize the log, place your hand only on the sides of
7.
log.
WARNING!
Never place a hand on the end
between the log and the splitting wedge.
Only one adult should stabilize the log and operate the
8.
control handle, so the operator has full control over the log
and the splitting wedge.
Move the control handle FORWARD or DOWN to split the
9.
wood.
Release the control handle to stop the wedge movement.
10.
Move the control handle BACK or UP to return the wedge.
11.
To remove partially split wood from the wedge, move the
12.
control handle to the REVERSE position until the wedge is
fully retracted to allow the split wood portion to contact
the log dislodger.
WARNING!
Never remove partially split wood from
the wedge with your hands. Fingers may become
trapped between split wood.
Once removed from the wedge with log dislodger, split the
13.
wood from the opposite end or in another location.
Horizontal Beam Lock
1
3
2
Figure 5-3
Figure 5-4
Figure 5-2
16
s
ectiOn
5— O
peratiOn
Summary of Contents for LS 33 TB
Page 46: ...Notas 8 22...
Page 47: ...23 Secci n 8 Notas...