Troxler EGauge 4590, Manual Of Operation And Instruction

Page: 66 / 186

4–20
Storing Measurement Data
After completing a measurement and before taking another
measurement, data can be stored to an active project. Refer to
Chapter 7: for instructions on creating and selecting the active
project.
If a project is active and the
Auto-Store
function (see page 8–12)
is enabled, press
〈
ESC
〉
or
〈
ENTER/START
〉
to continue. Foreach
measurement, the gauge can store a location description of up
to 12 characters, as well as a note of up to 15 characters. Follow
the prompts to enter location information and/or a note.
If a project is active but the
Auto-Store
function is
not
enabled:
 Press
〈
STORE
〉
to store the results. Follow the prompts to
enter location information and/or notes. For more
information on storing results manually, see page 8–14.

Press
〈 ESC 〉
to return to the
Ready
screen without storing
the results. Note that, until another measurement has
been taken, the results can be recalled (as described
below) and stored later.