Troxler 3430-M, Manual Of Operation And Instruction

Page: 36 / 142

3-8
SETTING THE COUNT TIME
The count time defines how long the gauge reads. Longer count
times produce better measurement precision. Troxler recommends a
count time of one minute for most sample measurements.
To change the count time, press
〈
TIME
〉
to display:
Use the up and down arrows to scroll through the available count
times. When the desired count time is displayed, press
〈
START/ENTER
〉
.
SETTING THE DEPTH
To change the depth of measurement, press
〈
DEPTH
〉
.
Use the up and down arrows to scroll through the available
measurement depths. When the desired depth is displayed, press
〈
START/ENTER
〉
.
SELECTING THE MODE (MARSHALL/PROCTOR)
The 3430 gauge may be used on construction materials (soils,
asphalt, concrete, and so on). To select the
Soil mode, enter or
activate a Proctor value. To select the Asphalt mode, enter or
activate a Marshall value. Only one Marshall and one Proctor can be
stored in the gauge at one time.
Time: xx min.
(
↑ ↓
or ENTER)
Depth: xx in.
(
↑ ↓
or ENTER)