manualshive.com logo in svg

Troxler 3430-M, Manual Of Operation And Instruction

Share
Download
Troxler 3430-M Manual Of Operation And Instruction Download Page 18

1-4 

 

GAUGE PARTS AND ACCESSORIES 

 

 

Figure 1-1 shows the Model 3430 gauge and its accessories. Use 
this figure and the list below to identify the gauge and parts as they 
are unpacked. 

 

1.

 

The 

Gauge 

is a portable instrument containing all electronic 

modules, battery packs, detectors, and radioactive sources. 

 

2.

 

The 

Reference Standard Block 

provides a uniform reference 

material for gauge adjustment to compensate for source decay. 

 

3.

 

The 

Scraper Plate/Drill Rod Guide 

is used to prepare the test 

site and aid in guiding the drill rod into the soil. 

 

4.

 

The 

Drill Rod 

is used to prepare a hole for a direct transmission 

reading

. Do Not Use the Source Rod For This Purpose! 

 

5.

 

Two 

Chargers/Adapters 

are supplied: one for DC (12 VDC) 

and one for AC (115/230 VAC 50/60 Hz.) 

 

6.

 

The 

Transport Case 

is a container designed for transportation 

of the gauge and associated parts. 

 

7.

 

The 

Extraction Tool 

provides a means of removing the drill 

rod from the test material after use. 

Summary of Contents for 3430-M















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands