Side wall flange with positioning holes
Corner section of the exchanger
Fgi. 6: Installation of the control damper
2.2 Installing the control damper (option)
■
Identify the correct position for the damper:
–
Place it on the open side of the bypass.
–
For exchangers with a side bypass: pay attention to the installation position
of the exchanger.
■
Rotate the exchanger so that it is positioned correctly (damper at the top).
■
Attach the damper to the exchanger.
■
Rivet the damper in the positioning holes of the side wall flange on both sides.
■
Attach the damper to the corner sections of the exchanger using self-cutting
screws.
Fgi. 7: For plate heat exchangers in size 200/240, the control damper is in two pieces
(shown here with a bypass in the middle)
Installation of compound
plate heat exchangers
Art. No. 4 212 499-en-00 / Page 3
Assembling plate heat exchangers
Air handling unit X-CUBE
81
