13.
Join the upper and the lower casing units with
raised countersunk self tapping screws (1)
(M6 x 40, part of the supply package).
ð
Installation of the plate heat exchanger is com-
plete. You can now install the adjacent AHU
casing units.
Airflows next to each other
1.
Position the AHU casing unit for the plate heat
exchanger at the installation location.
2.
Remove doors and panels on the side facing the
bracket (1) if at all possible.
If this is not possible, you can also install the
plate heat exchanger from the opposite side,
i.e. complete the installation steps on the other
side. In this case you also have to remove the
intermediate panels in step 5.
Setup and assembly
Setting up and assembling the air handling unit > Installing the plate heat exchanger
Air handling unit X-CUBE
32
