Personnel:
Crane driver
Protective equipment:
Industrial safety helmet
Protective clothing
Safety shoes
Protective gloves
WARNING!
Danger of death from the fall of AHU casing units.
If you overload lashing points or lifting gear, the load may fall down. You or others could be killed.
–
When you use transport tubes, be sure to use tubes with the correct diameter for the weight to be moved
‘Using transport tubes’ on page 15
.
–
Use all the lashing points provided.
–
Use only adequate lifting gear and slings.
–
Stand clear of suspended loads.
The number of drilled holes in the base frame (Fig. 8/6) indicates the number of transport tubes (Fig. 8/1) to be used.
Select the lashing points based on the number of transport tubes you use, Fig. 8
Fig. 8: Lashing points with two or four transport tubes
1.
Remove the plugs from the drilled holes in the base frame (Fig. 8/6) of the AHU casing unit.
2.
Push transport tubes (Fig. 8/1) through the drilled holes in the base frame.
Secure the transport tubes with screws (Fig. 8/2).
Transport and storage
Moving packages > Moving packages with a crane
Air handling unit X-CUBE
16
