5.7 Wiring
Air handling units with X-CUBE Control are factory
wired. The functions of all electronic parts, sensors,
actuators, etc. are tested before shipment. If a unit has
to be disassembled into AHU casing units for shipment
or for moving to the final installation location, the cables
are disconnected (before shipment) at suitable inter-
faces and either pushed back into the cable ducts or
rolled up. The wiring is shown in the wiring diagram (see
switch cabinet).
Fig. 38: Example of separate cables
1
Pull wire for pulling in cables without separation
2
Bus cable
3
Lighting
4
Anti-frost thermostat
Installation
Wiring
Air handling unit X-CUBE X2 / X-CUBE X2 compact
41
