Trox Technik FSL-CONTROL II, Installation And Configuration Manual, Page: 33 / 80

3.2.3.1 Resetting the filter operating hours counter
Fig. 24: Diagnosis - Room monitoring
After a filter on the ventilation unit has been changed, the filter operating hours counter should be reset. To do so, go
to the ‘Diagnostics’ menu and select the ‘Room monitoring’ tab; on the page that opens select ‘Reset filter
operating hours’ .
Control of ventilation units
FSL
‑
CONNECT software > Diagnosis
Single room control system FSL
‑
CONTROL II 33