2.2.2 Network with several control zones
Building a network
You may interconnect control zones by making use of a standard network protocol such as LON FTT10,
BACnet MS/TP or Modbus RTU. This requires a bus interface card to be connected to the FSL-CONTROL II master
controller.
Fig. 10: FSL
‑
CONTROL II, building a network
If the master controller is integrated with a central BMS (by others), it acts as a slave within the bus network, but
as a master within the FSL-CONTROL II system.
Making electrical connections
FSL-CONTROL II communication > Network with several control zones
Single room control system FSL
‑
CONTROL II
13