Triumph Tiger 1050 2008, Owner'S Handbook Manual

Page: 25 / 114

25
General Information
begin to flash. The minutes display is
adjusted in the same way as for the hours.
Once both hours and minutes are correctly
set, press the 'set' button to confirm the
setting. The display will cease to flash.
Trip Computer Reset
1. Trip computer display
2. Scroll button
3. Set button
To reset the trip computer only, select one of
the trip computer displays, press the 'scroll'
and 'set' buttons simultaneously for
2 seconds. After 2 seconds, the trip computer
will reset.
Coolant Temperature Gauge
1. Coolant temperature gauge
The coolant temperature gauge indicates the
temperature of the engine coolant.
When the ignition is switched on, all 10 bars
of the display will be shown. When the
engine is started from cold the display will
show 1 bar. As the temperature increases
more bars will be shown in the display.
The normal temperature range is between 3
and 6 bars.
If the coolant temperature becomes too high
the display will show 10 bars and the high
coolant temperature warning light in the
tachometer will illuminate.
Warning
Do not attempt to switch between the trip
computer display modes or reset the trip
computer with the motorcycle in motion as
this may lead to loss of motorcycle control
and an accident.
1
2
3
ceds
Caution
Do not continue to run the engine if either
of the high temperature warnings are
displayed as severe engine damage may
result.
1
cedt