Triumph Tiger 1050 2008, Owner'S Handbook Manual

Page: 22 / 114

22
General Information
Speedometer and Odometer
The digital speedometer indicates the road
speed of the motorcycle. The read-out
displays the motorcycle road speed in
increments of one mile (or kilometer) per
hour.
In the speedometer face is the electronic
odometer and two trip meters. For details of
the operation of the odometer and trip
meters, please refer to the following pages.
Tachometer
The tachometer shows the engine speed in
revolutions per minute - rpm (r/min). On the
right side of the tachometer face is the
'red zone'. Engine rpm (r/min) in the red
zone is above maximum recommended
engine speed and is also above the range for
best performance.
Odometer/Trip Meter
1. Odometer/Trip meter display
2. Set button
3. Trip button
4. Trip meter 1 display
5. Trip meter 2 display
The odometer shows the total distance that
the motorcycle has travelled.
The odometer and two trip meters are
located in the same display frame as the
speedometer. Either trip meter shows the
distance that the motorcycle has travelled
since the meter on display was last reset to
zero.
Caution
Never allow engine rpm to enter the
'red zone' as severe engine damage may
result.
Warning
Do not attempt to switch between
odometer and trip meter display modes or
reset the trip meter with the motorcycle in
motion as this may lead to loss of
motorcycle control and an accident.
1
3
2
4 5
cedp