Triumph Tiger 1050 2008, Owner'S Handbook Manual

Page: 23 / 114

23
General Information
Use the 'trip' button to switch between the
odometer and trip meter display modes.
Press the 'trip' button repeatedly until the
desired display is visible. The display will scroll
through in the order:
• Odometer
• Trip Meter 1
• Trip Meter 2
To reset either of the trip meters, select and
display the trip meter to be zeroed then press
the 'trip' and 'set' buttons together for
2 seconds. After 2 seconds, the trip meter on
display will reset to zero.
Clock/Trip Computer
1. Clock/Trip computer display
2. Scroll button
The clock and trip computer information
appear on the same display.
The trip computer provides an indication of
fuel consumption, range, speed, time and
distance, recorded and calculated since the
last reset.
Each display provides the following
information:
Instantaneous Fuel Consumption
An indication of the fuel consumption at an
instant in time.
Average Fuel Consumption
An indication of the average fuel
consumption, calculated from when the trip
computer was last reset. After a reset the
display will show dashes until 0.1 miles/km
has been covered.
1
2
cedq