Triumph 900 Cruisers, Owner'S Manual

Page: 82 / 105

82
Maintenance and Adjustment
Battery Removal
1. Airbox finisher
2. Airbox finisher fastener
3. Airbox cover
4. Airbox cover fasteners
5. Stud and grommet location
1. Battery cover
2. Battery cover strap
3. Battery cover strap fastener
• Loosen the screw securing the
airbox finisher to the airbox cover.
Remove the finisher.
• Loosen the screws securing the
airbox cover to the airbox.
• Ease the cover outwards from the
motorcycle releasing a stud, located
at the rear of the cover, from its
grommet.
• Remove the fastener from the
battery cover strap.
• Detach the strap from its lower
hinge and remove the battery cover.
• Disconnect the battery leads,
negative (black) lead first.
• Tilt the battery outward from the top
to remove it from the battery tray.
Note:
• The Engine Control Module (ECM)
is located at the rear of the battery
tray and is secured to the
motorcycle by the battery. Ensure
the ECM is not disturbed during
the battery removal or installation
process.
T908045aUSA
1
2
3
4
5
T908045bUSA
1
2
3
Warning
Ensure that the battery terminals do not
touch any part of the motorcycle as this
may cause a short circuit or spark which
would ignite battery gases causing a risk of
personal injury and damage to the
motorcycle.