Triumph 900 Cruisers, Owner'S Manual

Page: 66 / 105

66
Maintenance and Adjustment
Inspection
1. Lever
2. Adjuster (lever end)
3. 0.08 - 0.12 in (2 - 3 mm)
• Check that there is 0.08 - 0.12 in
(2 - 3 mm) of clutch lever free play
at the point shown in the diagram
above.
• If there is an incorrect amount of
free play, adjustments must be
made.
Adjustment
1. Adjuster (engine end)
• Loosen the knurled locknut at the
lever end of the clutch cable and
turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
• Tighten the knurled locknut at the
clutch lever assembly.
• If the correct adjustment setting
cannot be achieved using the lever
adjuster, use the adjuster at the
engine end of the cable.
• Loosen the adjuster locknut.
• Turn the outer cable adjuster to give
0.08 - 0.12 in (2 - 3 mm) of free play
at the clutch lever.
• Tighten the locknut.
• Use the lever adjuster to make
minor adjustments as necessary.
• Ensure all locknuts are secured at
both ends of the cable.
cbmy
3
1
2
T908034
1