Triumph Adler P-C2160DN, Operation Manual

Page: 153 / 224

4-85
Using the Operation Panel
2
Press [OK] . A blinking question mark (
?
) appears.
3
Select
On
or
Off
using  or  .
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
IPSec (IPSec setting)
IPSec (IP Security Protocol) is a security protocol adopted as the
standard by the IETF for authentication and encryption in the third
network layer (IP layer).
It can be used with both IPv4 and IPv6.
The default setting is
Off
.
1
After entering the administrator ID and password, press  or 
repeatedly until
>IPSec
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Select
On
or
Off
using  or  .
4
Press [OK] .
5
Press [Menu] . The display returns to
Ready
.
Thin Print (Thin Print setting)
Select whether or not to use ThinPrint.
1
After entering the administrator ID and password, press

or

repeatedly until
>ThinPrint >
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Select
On
or
Off
using  or  .
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
>>HTTPS
? On
Note IPv4 uses 32-bit IP addresses and IPv6 uses 128-bit IP
addresses.
Note Check with your network administrator when selecting
network settings.
>IPSec
>IPSec
? Off
>ThinPrint >
>ThinPrint >
? On