background image

4-5

Using the Operation Panel 

Indicators in Message Display

Ready, Data, and Attention Indicators

The following indicators light during normal operation and whenever the 
printer needs attention. Depending on the status of lighting, each 
indicator has the following meaning:

Ready

Indicator

Description

Flashing.

 Indicates an error that you can resolve. For 

details, refer to the 

Troubleshooting on page 6-1

.

On.

 Indicates that the printer is ready and on-line. The 

printer prints the data it receives.

Off.

 Indicates that the printer is off-line because printing is 

manually stopped or automatically stopped due to an error 
condition. Data can be received but will not be printed. For 
details, refer to 

Error Messages on page 6-6

 if printing is 

automatically stopped when an error condition has 
occurred.

Flashing.

 Indicates that a data is being received.

On.

 Indicates either that data received is being processed 

before printing starts, or that the SSD, USB memory, or 
RAM disk is being accessed.

Flashing. 

If 

Please wait

 is displayed, the printer is 

warming up.

Or, the printer cannot print for some reason (e.g. there is no 
paper in the cassette). Check the message display and 
carry out the required action. For details, refer to 

Error 

Messages on page 6-6

.

On.

 The printer cannot print due to an error. Check the 

message display and carry out the required action. For 
details, refer to 

Error Messages on page 6-6

.

Summary of Contents for P-C2160DN

































































































































































































































Reviews: