Triumph Adler LP 4030, Advanced Operation Manual

Page: 112 / 144

Using the Operation Panel
2-86 ADVANCED OPERATION GUIDE
immediately without any time interval. You can use
B
and
A
to move the
cursor right and left.
8
Display the desired time and press [OK] .
9 Press [Menu] . The display returns to
Ready
.
Duplex Printing Error Detection Setting
If the error detection setting for duplex printing has been turned
On
, and
you attempt to print onto a paper size and paper type that cannot be used
for duplex printing, the
Duplex disabled Press GO
error message will
be displayed and printing will stop. To print onto one-side of the paper only
when this message is displayed, press
[GO] . The default setting is
Off
.
1 Press [Menu] .
2
Press
?
or
@
repeatedly until
Others >
appears.
3
Press
B
.
4 Press
?
or
@
repeatedly until
>Finishing Error >
appears.
5 Press
B
and display
>>Duplex
.
6 Press [OK] . A blinking question mark (
?
)
appears.
7 Press
?
or
@
to change
Off
to
On
.
8
Press [OK] .
9 To exit the menu selection, press [Menu] .
Others >
>Finishing >
Error
>>Duplex
Off
>>Duplex
? Off
>>Duplex
? On