Triumph Adler LP 4030, Advanced Operation Manual

Page: 10 / 144

Handling Paper
1-4 ADVANCED OPERATION GUIDE
Selecting the Right Paper
This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn, embossed,
or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper
jams, and can shorten the life of the machine. In particular, avoid using
paper with a surface coating or other surface treatment. Paper should have
as smooth and even a surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains
plastic or carbon. The heat of fusing can cause such paper to give off
harmful fumes.
Bond paper should contain at least 80% pulp. Not more than 20% of the
total paper content should consist of cotton or other fibers.
Paper Sizes
Cassettes and the MP Tray are available for the paper sizes listed in the
table below. The dimensional tolerances are ±0.7mm for the length and
width. The angle at the corners must be 90° ±0.2°.
MP tray Size
Cassette or
MP tray
Size
Envelope Monarch 3-7/8 × 7-1/2
inches
Legal 8-1/2 × 14 inches
Envelope #10 4-1/8 × 9-1/2
inches Letter 8-1/2 × 11 inches
ISO A6 10.5 × 14.8 cm ISO A4 21 × 29.7 cm
Envelope DL 11 × 22 cm ISO A5 14.8 × 21 cm
Envelope #9 3-7/8 × 8-7/8
inches ISO A6 10.5 × 14.8 cm
(FS-2000D: MP tray
only)
Envelope #6 3-5/8 × 6-1/2
inches Envelope C5 16.2 × 22.9 cm
JIS B6 12.8 × 18.2 cm ISO B5 17.6 × 25 cm
Statement 5-1/2 × 8-1/2
inches JIS B5 18.2 × 25.7 cm
Hagaki 10 × 14.8 cm Executive 7-1/4 × 10-1/2 inches
Ofuku-Hagaki 14.8 × 20 cm Oficio II 8-1/2 × 13 inches