Triumph Adler LP 4030, Advanced Operation Manual

Page: 100 / 144

Using the Operation Panel
2-74 ADVANCED OPERATION GUIDE
5
To change overriding mode, press [OK] . A
blinking question mark (
?
) appears.
6
Press
?
or
@
to change
Off
to
On
.
7 Press [OK] . The overriding mode is set.
8
To exit the menu selection, press [Menu] .
Creating Custom Paper Type
The following describes the procedure used to set a user-defined paper
type for the printer. Eight custom user settings may be registered. After
having been set, any of these may be called up when setting the paper
type for a paper source.
The paper weight and duplex path can be set (refer to Setting the Paper
Weight on page 2-75 , and Setting the Duplex Path on page 2-75 ) after
selecting the paper type to be customized as follows. For how to reset the
customized settings, refer to
Resetting the Custom Paper Type on page 2-
76 .
1
Press [Menu] .
2 Press
?
or
@
repeatedly until
Paper
Handling >
appears.
3
Press
B
.
4 Press
?
or
@
repeatedly until
>Type
Adjust >
appears.
5 Press [OK] . A blinking question mark (
?
)
appears.
6
Press
?
or
@
to display the desired paper type. The display changes as
shown below.
Custom 1 (to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
>Override A4/LT
? Off
Paper Handling >
>Type Adjust >
Custom 1
>Type Adjust
? Custom 1