Triumph Adler LP 4030, Advanced Operation Manual

Page: 46 / 144

Using the Operation Panel
2-20 ADVANCED OPERATION GUIDE
Job Storage
Job storage stores print jobs either temporarily or permanently, or in virtual
mailboxes, as you click an appropriate radio button on the printer driver
when printing from a computer.
Virtual Mailbox
Virtual mailbox is part of Job Storage, which stores print jobs on the
Microdrive without printing. It enables you to retrieve jobs later from the
operation panel.
Each mailbox may be used by an individual who desires to share the
printer in this mode. By default, each mailbox is numbered from ‘Tray 001,’
‘Tray 002,’... etc. To ‘post’ a job in one of these mailboxes, you assign a
numbered or named mailbox on the printer driver when printing.
To retrieve the stored job for printing, refer to Retrieving Jobs from Virtual
Mailbox (VMB) on page 2-24 .
NOTE:
The virtual mailbox can be used in PCL 6 emulation only.
Using Quick Copy
This mode enables you to print the requested number of copies of a job,
simultaneously storing the job on the Microdrive. When additional copies
are required, you can reprint the required number of copies from the printer
operation panel.
The default number of print jobs that can be stored on the Microdrive is 32.
This value can be increased to up to 50 from the e-MPS Configuration
menu. For details, refer to
Changing the Maximum Number of Quick Copy/
Proof-and-Hold Jobs on page 2-26 . When the number of jobs reaches the
limit, the oldest job will be overwritten by the new one. When the printer is
turned off, all stored jobs will be deleted.
Printing Additional Copies using Quick Copy
1 Press [Menu] .
2 Press
?
or
@
repeatedly until
e-MPS >
appears.
3
Press
B
.
4 Press
?
or
@
repeatedly until
>Quick
Copy
appears followed by the user name
(
Harold
, in this example). The user name
is assigned at printing using the printer
driver.
e-MPS >
>Quick Copy
Harold