Triumph Adler LP 4030, Advanced Operation Manual

Page: 97 / 144

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-71
the installed optional paper feeders (from the top most paper cassette to
the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
(LP 4035/4045 only)
Cassette 4
(LP 4035/4045 only)
7
When the desired paper source is displayed, press [OK] .
8 To exit the menu selection, press [Menu] .
Duplex Printing
You can automatically print on both sides of the paper.
Duplex printing is available for the following paper types:
Plain
Preprinted
Bond
Recycled
Rough
Letterhead
Color
Prepunched
High quality
Custom 1 (to 8)
Activating the duplexer is done by selecting either short edge or long edge
binding mode.
NOTE:
Duplex printing can be also performed from the MP tray. When
the MP tray is set to First Mode (First), the paper size and paper type will
be the same as those of the paper cassette currently set at the paper feed
source. If the paper to be fed from the MP tray does not match the paper
size and paper type of the current paper feed source cassette, a paper
jam may occur.
Binding Modes
Binding refers to the manner in which printed pages of paper are joined
together (by gluing, stitching, etc.) in book form. The two possible types of
binding are: long-edge binding, in which pages are joined together along
their long edge; and short-edge binding, in which they are joined together
along their short edge. In selecting a binding type, you must also consider
the orientation of the printed page. You can use long-edge or short-edge
binding with either landscape or portrait printing.