Triumph Adler LP 4030, Advanced Operation Manual

Page: 65 / 144

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-39
4
Select
KPDL
or
KPDL (AUTO)
using
?
or
@
.
5
Press [OK] .
6 Press
B
. Press
?
or
@
until
>Print KPDL
Errs
(errors) appears.
7 Press [OK] . A blinking question mark (
?
)
appears.
8 Select
On
using
?
or
@
. Press [OK] .
9
Press [Menu] . The display returns to
Ready
.
Default Font
You can select the default font for the current interface. The default font
can be one of the internal fonts or a font that is downloaded to the printer
memory or stored on CompactFlash card, Microdrive or option ROM.
In this menu, you can also set the type and pitch for Courier and Letter
Gothic; as well as to print a font list.
1
Press [Menu] .
2 Press
?
or
@
repeatedly until
Font >
appears.
3 Press
B
. Press
?
or
@
until
>Font
Select >
appears.
4 To select an internal font, make sure that
Internal
is displayed and press
B
. The
display changes. If
Internal
is not
displayed, press [OK] , then press
?
or
@
until it appears.
To select an optional font, press [OK] while
>Font Select >
is
displayed. Press
?
or
@
repeatedly until
Option
appears and then press
[OK] . Press
B
next to display the font selection shown above. You can
perform this operation only when optional fonts are installed in the printer.
Emulation
?KPDL
>Print KPDL Errs
Off
>Print KPDL Errs
? Off
Font >
>Font Select >
Internal
>> I000