Part 2: Kit
Bridging bracket
Showerhead holder
Control panel
Bottom bracket
Bulkhead
Rear entry supply
Fig.2
InSTallaTIon oPTIonS
Rear entry supply — option
The control panel is installed onto a tiled
wall. The mixing unit is behind an adjoining
wall with heated water pipe (supplied in the
mixing unit) running to the bulkhead
(Fig.2)
.
Falling supply — options 2 &
Here the mixing unit is installed in the loft
with the heated water pipe (supplied in the
mixing unit) running down the inside of the
riser rail. Water outlet at the bottom of the
riser rail.
Fig.3
shows the shorter version using the
940 mm riser rail passing through the guide
bracket.
Fig.4
shows the long version using three
brackets and both riser rail sections. This
uses the 700 mm rail connecting to the
bridging bracket with the 940 mm rail cut
to length.