Part 2: Kit
Bottom
bracket
Spacer
Retaining
screw
Riser rail
Fig.24
Fig.23
Fit the showerhead holder onto the riser
rail section — press and hold the button
on top of the holder to release the locking
mechanism, then slide onto the rail
(Fig.23)
.
Release the button to lock the holder in
place.
Refit the lower riser rail assembly into the
base of the bridging bracket, again making
sure the small cut-out engages the bracket
lug. Secure the rail and bottom bracket
assembly to the wall using the screw
supplied
(Fig.24)
.
