13
Triple Solar assembly instruction PVT heat pump panels UK January 2021
7. Placing the panels on the mounting rails
The TS clamping profile
The TS clamping profile is placed on the mounting rails, in the center of where the panel will be.
(Necessary profile in connection with wind and tensile loads).
1. Insert the slide connector into the rail and turn it a quarter turn.
2. Slide the TS clamping profile over the TS sliding connectors. Make sure it is placed in the
right direction to fit into the panel profile later.
3. Press the TS lock cap on the back of the TS clamping profile to prevent slipping. See Figure
7.1 a, b en c.
Figure 7.1-a
–
Insert TS clamping profile slide connector into the mounting rail
Figure 7.1-b sliding the TS clamping profile over the slide connector
Figure 7.1-c TS Lock cap against slipping of the TS clamping profile
