background image

   

NEC Display Solutions of America, Inc.

        

OL-V652 Installation Guide 

10 Point Touch Overlay for the V652

 

 

 

 

 

 

 

 

 

 

www.necdisplay.com

  

 

 

 

 

 

 

 

 

OL-V652                

 

1

1.0 

Contents 

Guide Purpose 

 

 

 

 

 

 

 

 

 

 

 

Page 1 

Notes 

and 

Warnings 

           Page 1 

Equipment 

 

 

 

 

 

 

 

 

 

 

 

 

Page 2 

Dimensional 

Drawings           Page 2 

Integration 

Procedures           

 

 

 

 

 

 

 

 

Page 3 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.0 

Purpose 

2.1 

This procedure describes the steps to install the OL-V652 IR Touch Overlay onto the V652 display 

 

3.0 

Notes and Warnings 

3.1 

The overlay contains tempered glass.  Use caution when handling. 

3.2 

The overlay has an integrated USB cable located in the bottom right corner.  Ensure the cable is not 
pinched, crushed, or damaged during installation.  

3.3 

Installation requires two persons at all times to ensure the touch screen frame does not bend or torque. 

3.4 

Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen 
overlay. 

3.5 

Contact NEC Display Solutions support if you have any questions or require additional installation 
guidance support. 

500 Park Boulevard, Suite 1100 
Itasca, IL 60143 
Phone: (800) 632-4662 

Summary of Contents for OL-V652

Page 1: ...verlay contains tempered glass Use caution when handling 3 2 The overlay has an integrated USB cable located in the bottom right corner Ensure the cable is not pinched crushed or damaged during installation 3 3 Installation requires two persons at all times to ensure the touch screen frame does not bend or torque 3 4 Once the touch screen is installed do not lift the monitor by grasping or holding...

Page 2: ...rlay for the V652 www necdisplay com OL V652 2 4 0 Equipment 4 1 1 OL V652 IR touch screen overlay 4 Bezel retention brackets for OL V652 4 6 32 x 1 4 Undercut Phillips Machine Screws Note Quantity 1 Machine Screw Provided as Spare 1 10ft USB Extension Cable 5 0 Dimensional Drawings ...

Page 3: ...e unit 6 3 3 Use circular motion to avoid smudges and streaks 6 3 4 DO NOT USE any chemical solvents such as an Acidic or Alkali solution 6 4 With help from a partner lift the bezel so the top back lip of the touch screen frame clears the monitor 6 5 Center and slide the top of touch screen bezel over the monitor while holding the bottom of the touch screen frame approximately six inches out from ...

Page 4: ... of the monitor between the bottom of the monitor and the touch frame bezel 6 8 2 Align the bracket screw hole with the bezel Attach the bezel retention bracket to the bezel with the 6 32 x 1 4 undercut screws provided 6 8 3 Repeat for remaining three brackets 6 9 Connect the touch screen USB cable to the PC media player providing video to the display 6 10 Installation is complete ...

Reviews: