Storm-OM-001 -
Storm-OM-001
50
28 February 2020
This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
10.8
Replacing a Base Station
Remove the Base Station by removing the screw holding it in place.
1-
When the new Base station is connected and secured the calibration will need to be
performed.
2-
Settings
3-
Configure Base Station Channels
4-
The Base Stations need to be on different channels,
but never channel 1 & 2
. If you
own more than 1 Storm, make sure the Base Stations do not share a channel in-
between different machines.
5-
Confirm Calibration
and reboot the Storm.
