Trio JR240 User Manual Download Page 75

Page: 75 / 76

Page 75

J-Series Data Radio – User Manual

list of conditions and the following disclaimer in the documentation and/or other

materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must

display the following acknowledgement: “This product includes cryptographic

software written by Eric Young ([email protected])” The word ‘cryptographic’

can be left out if the routines from the library being used are not cryptographic

related.
If 4. You include any Windows specific code (or a derivative thereof) from the

apps directory (application code) you must include an acknowledgement: “This

product includes software written by Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.
The license and distribution terms for any publicly available version or derivative

of this code cannot be changed. i.e. this code cannot simply be copied and put

under another distribution license [including the GNU Public License.]

END OF SCHEDULE 2

Schedule 3

If this product contains open source software from the NTP project, refer to the

following license:

*******************************************************************************************

* Copyright (c) David L. Mills 1992-2007
* Permission to use, copy, modify, and distribute this software and its

documentation for any purpose with or without fee is hereby granted, provided

that the above copyright notice appears in all copies and that both the copyright

notice and this permission notice appear in supporting documentation, and

that the name University of Delaware not be used in advertising or publicity

pertaining to distribution of the software without specific, written prior

permission. The University of Delaware makes no representations about the

suitability this software for any purpose. It is provided “as is” without express or

implied warranty.

******************************************************************************************
END OF SCHEDULE 3

Schedule 4

If this product contains open source software from the NetSNMP project:
Part 1:

this software and its documentation for any purpose and without fee is hereby

granted, provided that the above copyright notice appears in all copies and

that both that copyright notice and this permission notice appear in supporting

documentation, and that the name of CMU and The Regents of the University of

California not be used in advertising or publicity pertaining to distribution of the

software without specific written permission.
Part 2:

Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054,

U.S.A Copyright (c) 2003-2004, Sparta, Inc All rights reserved.
Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list

of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this

list of conditions and the following disclaimer in the documentation and/or other

materials provided with the distribution.
Neither the name of the Networks Associates Technology, Inc nor the names of

its contributors may be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.
END OF SCHEDULE 4

Summary of Contents for JR240













































































Search results

Summary of Contents for JR240

Reviews:

Related manuals for JR240

Brands by name

Popular brands

Trio JR240, User Manual

Search results

Summary of Contents for JR240

Reviews:

Related manuals for JR240

Brands by name

Popular brands