Trinity Highway MATT, Assembly Manual

Page: 24 / 44

TrinityHighway.com
February 2022
STEP 5A
MATT™ Double Spacer Assembly
Post 1 and 2
PARTS INSTRUCTIONS
H 628280A 2 EA
Reference: SS-6288
1. Assemble the MATT™ Double Spacer (Part H) to the MATT™ SYTP®
(Post 2) and MATT™ CR Post 1 as shown above with the Bent Flange
Pointed Downward using specified hardware (Parts FF, GG, HH).
2. Ensure the downstream slotted holes in the MATT™ Double Spacer is
bolted to the MATT™ CR Post 1 and MATT™ SYTP® with Soil Plate (Post
2) using the
downstream holes in the post.
3. Assemble all hardware loosely ensuring bolt is seated for this step.
FF 113457G 4 EA
GG 118009G 8 EA
HH 115939G 4 EA
Use only Trinity Highway parts that
are specified herein for the MATT™
for assembling, maintaining, or
repairing the MATT™. Do not
utilize or otherwise commingle
parts from other systems even if
those systems are Trinity Highway
systems.
WARNINGS
Ensure the downstream slotted holes in the MATT™ Double
Spacer is bolted to the MATT™ CR Post 1 and MATT™ SYTP®
with Soil Plate (Post 2) using the
downstream holes in the post.
Ensure the MATT™ Double Spacer is orientated correctly with the
Bent Flanged Pointed Downward for Posts 1 and 2.
Failure to follow these warnings could result in serious injury or
death in the event of a vehicle impact with the system.
Assemble all hardware
loosely ensuring bolt is
seated for this step.
Bent Flange Pointed Downward
DO NOT USE
THIS HOLE
Orientation of the
MATT™ Double Spacer Detail