Trinity Highway MATT, Assembly Manual

Page: 20 / 44

TrinityHighway.com
February 2022
STEP 2C
MATT™ SYTP
®
With Soil Plate W-Shaped
Assembly for Posts 3 to 5
PARTS INSTRUCTIONS
M 628271G 3 EA
Reference: SS-6288
1. Assemble the MATT™ Soil Plate W-Shaped (Part NN) to the downstream
side of the 6’-0” [1.829 m] MATT™ SYTP
®
(Part M) as shown above using
specified hardware (Parts BB, OO).
2. Tighten all threaded hardware to a snug position with a minimum of two (2)
bolt threads protruding beyond the nut.
3. Assemble the 6’-0” [1.829 m] MATT™ SYTP
®
with Soil Plate W-Shaped on
the downstream side of the post as shown above for Posts 3-5 at location
established in Step 1.
4. Ensure the center of the SYTP
®
Holes are approximately at finished grade
(+1”, -0”) [+25 mm, -0 mm].
BB 3340G 6 EA
NN 628269G 3 EA
OO 113660G 6 EA
Use only Trinity Highway parts that
are specified herein for the MATT™
for assembling, maintaining, or
repairing the MATT™. Do not
utilize or otherwise commingle
parts from other systems even if
those systems are Trinity Highway
systems.
WARNINGS
Ensure the MATT™ Soil Plate W-Shaped is on the downstream
side of MATT™ SYTP
®
3-5.
Ensure the center of the SYTP
®
Holes are approximately at finished
grade (+1”, -0”) [+25 mm, -0 mm].
Ensure the Post spacing is as established in Step 1.
Ensure threaded hardware is tightened to a snug position with a
minimum of two (2) bolt threads protruding beyond the nut.
Failure to follow these warnings could result in serious injury or
death in the event of a vehicle impact with the system.