Trinity Highway MATT, Assembly Manual

Page: 8 / 44

TrinityHighway.com
February 2022
Recommended Tools
Documentation
•
Manufacturer’s MATT™ Product Description Assembly Manual (Current Version).
•
MATT™ Drawing(s) SS-6288 (Current Version).
Personal Protective Equipment
•
Eye Protection
•
Work Gloves
•
Safety-Toe Shoes
•
Back Protection
•
Hard Hat
•
Reflective Vest
•
Apron
Miscellaneous
•
Traffic Control Equipment and Plan per state/specifying agency standards and the MUTCD.
•
SAE Combination Wrench Set
•
Socket Set & Socket Wrench
•
Hammer
•
Chalk Line
•
Tape Measure
•
Marking Paint and Pen
•
Straight Edge
•
Level
•
Plumb Line
•
Post Pounder (commonly used for driving posts)
•
Auger
•
Soil Tamper
•
5/8” Alignment Tool (Drift Pin), used to help align panels
•
Locking Pliers and/or Pipe Wrench
•
Calibrated Torque Wrench, capable of measuring 65 ft.-lbs. [88 Nm].
Note:
The provided list of tools is a general recommendation and should not be considered an
extensive list. Depending on specific site conditions and the complexity of the assembly, the required
tools may vary. Decisions as to what tools are needed to perform the job are entirely the responsibility
of the state/specifying agency and the selected contractor performing the assembly of the system at
the state/specifying agency’s site.