Trinity Highway INGAL SS180 M, Assembly Manual

Page: 25 / 65

trinityhighway.com 24 Revision A November 2019
Lubrication
When handling hydraulic fluid, use appropriate measures to prevent spillage. Clean any
spillage immediately.
1) Add Hydraulic Fluid
Add hydraulic fluid as required and check the fluid level monthly. The reservoir is full when
the fluid level is filled to the location indicated below when the system is unfolded. Use only
Dexron™ III ATF Hydraulic fluid.
RESERVOIR CAP
FILL RESERVOIR TO THIS LOCATION
WHEN THE SYSTEM IS UNFOLDED
Figure 23
2) Grease Pivot Points
Figure 24 shows three (3) pivot locations equipped with grease fittings that require periodic
lubrication. To prevent excessive noise and/or wear grease the locations shown below as
required.
GREASE FITTING
LOCATIONS
Figure 24