Trinity Highway INGAL SS180 M, Assembly Manual

Page: 22 / 65

trinityhighway.com 21 Revision A November 2019
Maintenance
Before performing any maintenance on the SS180
®
M, thoroughly read and understand the
Maintenance Section and the Safety Section of this manual.
Routine Maintenance
Description Interval
1. Height - The height of the system is important to its impact performance.
Check regularly and adjust as necessary (Figure 18).
As Required
↑
12” ± 1” [305 mm ± 25 mm]
↓
FLAT AND LEVEL SURFACE
Figure 18
2. Fasteners - Check the tightness of the fasteners. Refer to the Drawing
Package for all fastener locations. Check all bolts attaching the Cartridges
to the support structure.
Monthly
3. Lights - Replace non-working lights.
As Required
4. Lubrication - Lubricate as described in the Lubrication Section
(Maintenance Section - III).
5. Hydraulic Pump – Clean the outside of the Hydraulic Pump as
required. Check fluid level and electrical connections. Remove all
residue or debris on or around the pump.
6. Hydraulic Ram – Clean the Hydraulic Ram. Remove all residue or
debris on or around the ram.
7. Hydraulic Hoses – Check all Hydraulic Hoses for damage, leaks or
cracks. Replace damaged or leaky hoses.
8. Clean System - Clean the system frame, Cartridges and Impact Face
from dirt and salt. Always check lubrication after cleaning.
Varies – p. 23
Monthly
Monthly
Each use
Monthly & each
use when salt &/or
snow are present