Learn Switch Connector
The learn switch connector is used to reset the keypad to assign a new
authority code. See page 14 for further information on teaching keypad
a new authority code.
Status LED
LED flashes at power-up and provides short periodic pulses if voltage
supply is low.
Miscellaneous I/O Module Features
Door Locking and Unlocking
A short single pulse output provides locking and unlocking operation
to the entry doors (zone 1). The compartment doors (banks A-D) are
locked and unlocked with a single pulse. The locking and unlocking
pulses have opposite polarities. Locking and unlocking operations are
activated via vehicle switch inputs or according to
e-
PAD
and
e-
FOB
instructions.
Lock and Unlock Confirmation
•
Standard mode: The headlights flash once and the horn honks
once with a lock command. On unlock, the headlights flash
twice and the horn honks twice.
•
Cargo mode: There is no unlock confirmation. The headlights
flash once and the horn honks once when either the entry or
compartment doors are locked. When both entry and
compartments doors are locked within 10 seconds, headlights
flash twice and the horn honks twice.
•
Keypad: The headlights flash once and the horn honks once
with a lock command. On unlock, the headlights flash twice and
the horn honks twice.
•
Locking and unlocking confirmation is deactivated while engine
is running.
Deactivate Lock Confirmation
The system defaults to confirmation ON with power-up. Horn and
headlight confirmation can be toggled off and on from the keypad.
1. Enter valid access code.
2. Hold down (9 / 0) or (4) button until double beep sounds.
Release.
3. Press (1 / 2) or (1) button.
Note:
Lights flash and horn honks to indicate that you are setting horn
and headlight confirmation to ON.
10
Summary of Contents for 22272-03
Page 28: ...UM15 22272 03 11 06 1...
