TriMark 22272-03, Installation Instructions Manual

Page: 10 / 28

7
Additional Features
Dome/Porch Light Activation
The dome/porch light is activated for a timed duration (5-60 seconds)
whenever a keypad button is pressed or when system is unlocked from
FOB transmitter or vehicle switch. The time duration is dependent on
the trim pot A setting (see page 8). The dome/porch light is deactivated
with starting the engine and locking the entry doors.
e
-
PAD Protective Deactivating Security Feature
After repeated entry of incorrect codes (20 button presses without
enabling), the keypad enters an inactive mode that disables button
recognition for 1 minute. This helps prevent undesired access by
entering random codes. No beep will sound with button press while the
system is disabled.
e- GRAB Handle Lighting
The grab handle is lit continuously. The e- PAD is lit with a button press
and while training new access and authority codes.
DIP Switch Settings for Keypad Configurations
The following vehicle switch assignments of connector J2 (see
Appendix B, page IV), pins 1 thru 6 define outputs due to an interior
switch. These are the I/O module inputs that correspond to the 6th
button press operations. When a pin is grounded, its corresponding
function is specified.
Configuration A [SW 1 off / SW 2 off]
Pin 1: Locks all doors
Pin 2: Unlocks all doors
Pin 3: Unassigned
Pin 4: Unassigned
Pin 5: Unassigned
Pin 6: Unassigned
Configuration B [SW 1 off / SW 2 on]
Pin 1: Locks all doors
Pin 2: Unlocks all doors
Pin 3: Locks all compartment doors (banks A-D, not entry door
relays)
Pin 4: Unlocks all compartment doors (banks A-D, not entry door
relays)
Pin 5: Locks entry door(s)
Pin 6: Unlocks entry door(s)