S2 DIP Switches
The S2 DIP switch is located under the I/O module cover. Functional
assignments are described below.
Switches 1 and 2
Provide functional assignment of how relay banks A-D are grouped.
The following table shows the configuration type (A-D), DIP switch
assignment, and subsequent relay assignment. Configuration D is
standard.
Switch 3
Controls auto locking and unlocking via engine input.
•
Switch 3 ON: auto locking and unlocking activated.
•
Switch 3 OFF: auto locking and unlocking deactivated.
Switch 4
Defines standard mode or cargo mode for the FOB transmitter.
•
Switch 4 ON: cargo mode. The top and bottom center buttons
lock and unlock entry doors. The left and right middle buttons
lock and unlock compartment doors.
•
Switch 4 OFF: standard mode. The top and bottom center
buttons lock and unlock all doors. The left and right middle
buttons control the panic and auxiliary 1 functions.
Configuration Switch 1 Switch 2
Relay bank grouping
A
Off
Off
1 group exists. All banks are
grouped with entry door.
B
Off
On
2 groups exist. #1 entry group. #2
group to banks A, B, C, and D.
C
On
Off
5 groups exist. # 1 entry. #2 to
bank A, #3 to bank B, #4 to bank
C, and #5 to Bank D.
D
On
On
3 groups exist. #1 entry group. #2
group to banks A and B. #3 group
to banks C and D.
9
Summary of Contents for 22272-03
Page 28: ...UM15 22272 03 11 06 1...
